Enable Condition: Notes
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | >/= 70°C (158°F) |
| Engine load | >/= Map 5 |
| Intake air change during 0.5 engine rev. | </= 0.02 g (0.001 oz)/rev |
| Learning value of EVAP cone, during purge | </= 0.1 |
| Cumulative time of canister purge after engine start | 20 seconds or more |
| Continuous period after canister purge starting | 30 seconds or more |