Trouble Symptom:
WARNING: This page is about a different variant/trim than selected.
- Engine keeps running at higher revolution than specified idling revolution.
- Fuel is cut according to fail-safe function.
CAUTION:
After repair or replacement of faulty parts, conduct Clear Memory Mode < Ref. to
, OPERATION , Clear Memory Mode.> and Inspection Mode < Ref. to
, PROCEDURE , Inspection Mode.>.
DIAGNOSTIC PROCEDURE (DTC P0519)
| Step | Check | Yes | No | |
|---|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. |
Is any other DTC displayed? | Inspect the relevant DTC using "List of Diagnostic Trouble Code (DTC)". < Ref. to
, LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
NOTE:
In this case, it is not necessary to inspect DTC P0519.
|
Go to step 2. | |
| 2 CHECK AIR INTAKE SYSTEM.
|
Is there any fault in air intake system? | Repair air suction and leaks. | Go to step 3. | |
| 3 CHECK ELECTRONIC THROTTLE CONTROL.
|
Are foreign matters found inside the electronic throttle control? | Remove foreign matters from the electronic throttle control. | Perform the diagnosis of DTC P2101. | |