Trouble Symptom:
WARNING: This page is about a different variant/trim than selected.
- Occurrence of noise
- Overheating
CAUTION:
After repair or replacement of faulty parts, conduct Clear Memory Mode < Ref. to
, OPERATION , Clear Memory Mode.> and Inspection Mode < Ref. to
, PROCEDURE , Inspection Mode.>.
NOTE:
If the vehicle, with the engine idling, is placed very close to a wall or another vehicle, preventing normal cooling function, the OBD system may detect malfunction.
DIAGNOSTIC PROCEDURE (DTC P0483)
| Step | Check | Yes | No | |
|---|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. |
Is any other DTC displayed? | Inspect the relevant DTC using "List of Diagnostic Trouble Code (DTC)". < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Check the radiator fan, fan motor and thermostat. < Ref. to RADIATOR MAIN FAN AND FAN MOTOR .> and < Ref. to RADIATOR SUB FAN AND FAN MOTOR . If thermostat is stuck replace thermostat. | |