Section 19 (Cooling System (H4DOTC)): General Description: Preparation Tool

WARNING: This page is about a different variant/trim than selected.

SPECIAL TOOL DESCRIPTION

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Fig 1	499977100	CRANK PULLEY WRENCH	Used for stopping crank pulley when loosening and tightening crank pulley bolts.
Fig 2	499977500	CAM SPROCKET WRENCH	Used for removing and installing the intake camshaft sprocket.
Fig 3	499207400	CAM SPROCKET WRENCH	Used for removing and installing the exhaust camshaft sprocket.

Fig 1: Identifying Special Tool ST-499977100

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Identifying Special Tool ST-499977500

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Identifying Special Tool ST-499207400

Courtesy of SUBARU OF AMERICA, INC.