Rear Exhaust Pipe: Installation

WARNING: This page is about a different variant/trim than selected.

Apply a coat of spray type lubricant to the mating area of cushion rubber.
Install the rear exhaust pipe bracket to cushion rubber.

Fig 1: Installing Rear Exhaust Pipe Bracket To Cushion Rubber
Courtesy of SUBARU OF AMERICA, INC.
Install the rear exhaust pipe to both mufflers.
NOTE: Use a new gasket.

Tightening torque:

48 N.m (4.9 kgf-m, 35.4 ft-lb)

Fig 2: Installing Rear Exhaust Pipe To Both Mufflers
Courtesy of SUBARU OF AMERICA, INC.
Install the rear exhaust pipe to center exhaust pipe.
Tightening torque:

35 N.m (3.6 kgf-m, 26.0 ft-lb)

Fig 3: Installing Rear Exhaust Pipe To Center Exhaust Pipe
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.