Section 18 (Exhaust (H4DOTC)): Muffler: Removal

WARNING: This page is about a different variant/trim than selected.

Separate the muffler (RH) from rear exhaust pipe.

Fig 1: Identifying Bolts For Separating Muffler (RH) From Rear Exhaust Pipe
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion rubbers, and detach the muffler.
CAUTION: Be careful not to drop the muffler during removal.

NOTE: To facilitate removal, apply a coat of spray type lubricant to the mating area of cushion rubbers in advance.

Fig 2: Removing Cushion Rubbers
Courtesy of SUBARU OF AMERICA, INC.
Perform the same procedure for muffler (LH).