LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R VDC Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical (H4DOTC)) >> Timing Belt Cover >> Installation

Timing Belt Cover: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the front timing belt cover (C).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.6 ft-lb) 

  2. Install the timing belt cover (RH) (B).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.6 ft-lb) 

  3. Install the timing belt cover (LH) (A).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.6 ft-lb) 

  4. Install the crank pulley. < Ref. to , INSTALLATION , Crank Pulley. >
  5. Install the V-belts. < Ref. to , INSTALLATION , V-belt. >
scientia non olet · About LEMON Manuals