Valve Springs
WARNING: This page is about a different variant/trim than selected.
- Check the valve springs for damage, free length, and tension. Replace the valve spring if it is not within the standard value presented in the table.
- To measure the squareness of the valve spring, stand the spring on a surface plate and measure its deflection at the top of spring using a try square.
SPRINGS SPECIFICATION
| Free length | mm (in) | 47.32 (1.863) |
| Tension/spring height N (kgf, lb)/mm (in) | Set | 205 - 235 (20.9 - 24.0, 46.1 - 52.8)/36.0 (1.417) |
| Lift | 426 - 490 (43.4 - 50.0, 95.8 - 110)/26.50 (1.041) | |
| Squareness | 2.5°, 2.1 mm (0.083 in) | |