Special Tool
WARNING: This page is about a different variant/trim than selected.
- Be careful not to burn yourself, because each part on the vehicle is hot after running.
- Be sure to tighten fasteners including bolts and nuts to the specified torque.
- Place shop jacks or rigid racks at the specified points.
- Before disconnecting electrical connectors of sensors or units, be sure to disconnect the ground cable from battery.
SPECIAL TOOL REFERENCE
| ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
|---|---|---|---|
| Fig 1 | 18353AA000 | CLAMP PLIERS | Used for removing and installing PCV hose. |