Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | >/= 70°C (158°F) |
| Intake air amount | >/= Map 5 |
| Intake air change during 0.5 engine rev. | </= 0.02 g (0.001 oz)/rev |
| Learning value of EVAP cone, during purge | < 0.1 |
| Cumulative time of canister purge after engine start | 20 seconds or more |
| Continuous period after canister purge starting | 30 seconds or more |
Map 5
MAP 5
| Engine speed (RPM) | idle | 650 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 |
| Measured value (g (oz)/rev) | NA | 0.201 (0.007) | 0.150 (0.005) | 0.150 (0.005) | 0.156 (0.006) | 0.161 (0.006) | 0.157 (0.006) | 0.167 (0.006) | 0.184 (0.006) | 0.198 (0.007) |