Front Brake Pad: Inspection
Check the pad thickness A.
PAD THICKNESS SPECIFICATIONS
| Pad thickness | Standard value | 11 mm (0.43 in) |
| Wear limit | 1.5 mm (0.06 in) |
NOTE:
- Always replace the pads for both right and left wheels at the same time.
- Also replace the pad clips if they are twisted or worn.
- A wear indicator is provided on the inner disc brake pad. If the pad wears down to such an extent that the end of wear indicator contacts disc rotor, a squeaking sound is produced as the wheel rotates. If this sound is heard, replace the pad.
- Replace the pad if there is oil or grease on it.