Rear Brake Pad: Removal

Set the vehicle on a lift.
Loosen the wheel nuts.
Jack-up the vehicle, and then remove the rear wheel.
Remove the lower caliper bolt.

Fig 1: Removing Lower Caliper Bolt
Courtesy of SUBARU OF AMERICA, INC.
Raise the caliper body upward and support it.
NOTE: Do not disconnect the brake hose from caliper body.
Remove the pad.

NOTE: If the brake pad is difficult to remove, use the same procedure as for front disc brake pad.

< Ref. to REMOVAL , Front Brake Pad. >

Fig 2: Removing Pad

Courtesy of SUBARU OF AMERICA, INC.