PHV Cable
- Install the PHV cable in the reverse order of removal.CAUTION:
- If the cable clamp is damaged, replace it with a new one.
- Avoid sharp bending of PHV cable as it may cause breakage.
- Apply grease to the following points.
- Hook portion of return spring
- Cable end portion of lever
Grease: SUNLIGHT 2 (Part No. 003602010)
- Adjust the PHV cable. < Ref. to ADJUSTMENT , Hill Holders
CAUTION:
After replacing the PHV cable with new one, operate the clutch pedal about 30 times as a running-in operation prior to adjustment.