Rear Brake Hose (Drum Brake)

Install the brake hose to wheel cylinder.
Tightening torque:

18 N.m (1.8 kgf-m, 13.0 ft-lb)
Secure the brake hose to bracket on strut using a clamp.
Connect the brake hose through hole in bracket on body.
Tightening torque:

15 N.m (1.5 kgf-m, 10.8 ft-lb)

Fig 1: Connecting Brake Hose Through Hole In Bracket On Body
Courtesy of SUBARU OF AMERICA, INC.
Bleed air from the brake system.