LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Removal >> At Model

At Model

  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover from instrument panel.
  3. Remove the clevis pin which secures brake pedal to brake booster operating rod. Also disconnect the stop light switch connector.
  4. Remove the two bolts and four nuts which secure the brake pedal to pedal.
    Fig 1: Removing Bolts And Nuts Which Secure Brake Pedal To Pedal
    G03808712Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals