LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Thoroughly drain brake fluid from reservoir tank.
  2. Disconnect fluid level indicator harness connector.
  3. Remove brake pipes from master cylinder.
  4. Remove master cylinder mounting nuts, and take out master cylinder from brake booster.
    CAUTION: Be extremely careful not to spill brake fluid.
    Brake fluid spilt on the vehicle body will harm the painted surface; wash it off quickly if spilt.
scientia non olet · About LEMON Manuals