LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Master Cylinder >> Assembly >> Assembling Procedure

Assembling Procedure

  1. Assembling piston assembly:

    Apply recommended brake fluid to inside wall of cylinder, and to outer surface of piston assembly, and install piston assemblies carefully into cylinder.

  2. Assembling cylinder pin:
  3. Press the pawl and install the piston retainer into the master cylinder.
  4. Install seal to reservoir tank.
    Fig 1: Installing Seal To Reservoir Tank
    G03751825Courtesy of SUBARU OF AMERICA, INC.
  5. Install pin with drift pins which secures reservoir tank to master cylinder.
scientia non olet · About LEMON Manuals