Passenger's Airbag
PASSENGER'S AIRBAGHow to disconnect:
Holding female connector (C) in one hand, use your other hand to pull slide lock (A) in the direction of the arrow.
CAUTION: When pulling, be sure to hold onto the slide lock and not the male connector or wire.
How to connect:
1. Insert female connector (C) over male connector socket (B), and push slide lock (A) into the female connector tabs.
CAUTION: Do not hold onto the slide lock.
2. If the male connector socket is pushed too hard, slide lock (A) will go past slide lock (A) tabs and connect.