LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation - Driver Info >> Combination Meter Assembly >> Removal

Combination Meter Assembly: Removal

  1. Disconnect the ground cable from battery.
  2. Set the tilt steering at lowest position.
  3. Remove the screws and detach meter visor.
    Fig 1: Identifying Screws & Meter Visor
    G00935967Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the screws of combination meter and pull out the meter toward you.
    Fig 2: Identifying Screws & Meter
    G00935968Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector in the upper area of combination meter to remove meter.
CAUTION:
  • Be careful not to damage the meter or instrument panel.
  • Pay particular attention to avoid damaging the meter glass.
scientia non olet · About LEMON Manuals