LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Forester XT, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Disc Brake Pads >> Installation

Rear Disc Brake Pads: Installation

  1. Apply a thin coat of Molykote AS880N (Part No. K0777YA010) to the frictional portion between pad and pad clip.
  2. Install pad on support. See Figure .
  3. Install caliper body on support. Tighten to specification. See TORQUE SPECIFICATIONS  .
    NOTE: If it is difficult to push piston during pad replacement, loosen air bleeder to facilitate work.
scientia non olet · About LEMON Manuals