LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Timing Belt >> Engine Mechanical (H4SO) >> Camshaft Sprocket >> Removal

Camshaft Sprocket: Removal

  1. Remove V-belt. Refer to REMOVAL , V-BELT.
  2. Remove crankshaft pulley. Refer to REMOVAL , CRANKSHAFT PULLEY.
  3. Remove belt cover. Refer to REMOVAL , BELT COVER.
  4. Remove timing belt assembly. Refer to REMOVAL , TIMING BELT ASSEMBLY.
  5. Remove camshaft position sensor. Refer to REMOVAL , Camshaft Position Sensor.
  6. Remove camshaft sprocket No. 1 and No. 2. To lock camshaft, use ST.

    ST 18231AA010 CAMSHAFT SPROCKET WRENCH

    NOTE: CAMSHAFT SPROCKET WRENCH (499207100) is also can be used.
    Fig 1: Removing Camshaft Sprocket No. 1 & No. 2
    G00900852Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals