LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Rear Finisher Light Assembly >> Removal >> Pickup

Rear Finisher Light Assembly: Removal: Pickup

  1. Disconnect ground cable from battery.
  2. Remove tail gate tray. Refer to REMOVAL , Tail Gate Tray.
  3. Remove tail gate cover.
    Fig 1: Removing Tail Gate Cover
    G03510151Courtesy of SUBARU OF AMERICA, INC.
  4. Separate connector. Remove nuts and detach rear finisher light.
    Fig 2: Detaching Rear Finisher Light
    G03510152Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals