LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Limited, 4D Sedan >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Timing Belt >> Engine Mechanical (H4SO) >> V-belt >> Installation >> Rear Side Belt

Rear Side Belt

  1. Install a belt, and tighten the slider bolt (B) so as to obtain the specified belt tension. See INSPECTION , V-belt>
  2. Tighten the lock nut (A).

    Tightening torque: 

    1. Lock nut (A);  22.6 N.m (2.3 kgf-m, 16.6 ft-lb)
    Fig 1: Tightening Lock Nut
    G02875293Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals