LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Gear Sensor/Switch >> Testing and Inspection

Gear Sensor/Switch: Testing and Inspection

Switches and Harness

INSPECTION
BACK-UP LIGHT SWITCH
Inspect the back-up light switch.

NEUTRAL POSITION SWITCH
1. Turn ignition switch to OFF.
2. Disconnect connector neutral position switch.








3. Measure resistance between neutral position switch terminals.
4. Replace defective parts.
scientia non olet · About LEMON Manuals