LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza RS, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Stop Light Switch >> Installation

Stop Light Switch: Installation

  1. Screw the stop light switch onto a bracket and secure it temporarily with a nut.
  2. Adjust the stop light switch position, and then tighten the nut. See Adjustment  , Stop Light Switch.
    1. Tightening torque:  8 N.m (0.8 kgf-m, 5.8 ft-lb)
scientia non olet · About LEMON Manuals