LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza RS, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Bleeding Brake System >> Bleeding Procedures >> Master Cylinder

Master Cylinder

  1. Disconnect the brake line at primary and secondary sides.
  2. Cover the master cylinder with vinyl bag.
  3. Carefully depress and hold the brake pedal.
  4. Close the outlet plug with your finger and release the brake pedal.
  5. Repeat steps  3 and  4 until brake fluid is completely bled from outlet plug.
  6. Remove the vinyl bag, then connect the brake pipe to master cylinder. Tighten to specification. See TORQUE SPECIFICATIONS  .
  7. Using water, wash off the spilled brake fluid at the master cylinder surrounding, then wipe up the water.
  8. Bleed air from the brake line. See BRAKE LINE  .
scientia non olet · About LEMON Manuals