LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Legacy GT Limited, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Bleeding Brake System >> Bleeding Procedures >> Master Cylinder

Master Cylinder

  1. Disconnect the brake line at primary and secondary sides.
  2. Carefully depress and hold the brake pedal.
  3. Close the outlet plug with your finger and release the brake pedal.
  4. Repeat steps  2 and  3 until brake fluid is completely bled from outlet plug.
  5. Install brake pipes to the master cylinder. Tighten pipes to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals