LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Self-Diagnostics - 2.2L & 2.5L >> Diagnostic Tests >> DTC P0336: Crankshaft Position (CKP) Sensor Circuit Range/Performance Problem

DTC P0336: Crankshaft Position (CKP) Sensor Circuit Range/Performance Problem

  1. Perform basic diagnostic procedure. See BASIC DIAGNOSTIC PROCEDURE . If DTC P0335 exists, diagnose and repair that DTC first. If DTC P0336 is only DTC set, go to next step.
  2. Turn ignition off. Ensure CKP sensor bolt is tightened securely. Tighten bolt as required. If CKP sensor and mounting bolt are properly installed, go to next step.
  3. Remove front timing belt cover and inspect crankshaft sprocket for damage. Replace crankshaft sprocket, if necessary. If crankshaft sprocket is okay, go to next step.
  4. Check installation of timing belt. See Figure. Repair/replace timing belt and adjust as necessary. If timing belt is properly installed, replace CKP sensor. Clear memory and perform verification procedure. See CLEARING DIAGNOSTIC TROUBLE CODES  and VERIFICATION PROCEDURE  .
scientia non olet · About LEMON Manuals