LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Timing Belt >> Engine Mechanical - 2.5L 4-Cylinder - SOHC >> Removal & Installation >> Cylinder Head >> Inspection

Cylinder Head: Inspection

Using a straight edge and feeler gauge, check cylinder head for warpage. Resurface cylinder head if warpage exceeds specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. Check cylinder head height. Replace cylinder head if not within specification. Check for cracks using Red lead.

scientia non olet · About LEMON Manuals