LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Parking Brake >> Shoe Clearance Adjustment

Shoe Clearance Adjustment

  1. Remove adjusting hole cover from back plate.
  2. Turn adjusting screw using a slot-type screwdriver until brake shoe is in close contact with disc rotor. See Fig 1 .
  3. Turn back (downward) adjusting screw 3 or 4 notches.
  4. Install adjusting hole cover to back plate.
Fig 1: Adjusting Shoe Clearance
G00275792Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals