LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> ZEXEL Rotary Vane >> Clutch Coil & Bearing >> Removal (Nissan)

Removal (Nissan)

  1. Hold clutch disc using clutch disc holder and remove center bolt. Using Clutch Disc Puller (J-38874), remove clutch disc and adjustment shim(s).
  2. Remove snap ring. Remove pulley using Pilot (J-39023) and universal 2-jaw puller. Position puller jaws onto edge of pulley to prevent pulley groove from being deformed. Remove clutch coil lead, 3 clutch coil retaining screws, and clutch coil. See Figure or Figure .
scientia non olet · About LEMON Manuals