LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> ZEXEL Rotary Vane >> Clutch Coil & Bearing >> Removal (Honda, Isuzu & Kia)

Removal (Honda, Isuzu & Kia)

  1. Using clutch disc/plate holder, remove clutch disc/plate bolt. Using puller and forcing screw, remove clutch disc/plate. See Figure or Figure .
  2. Remove shim(s) and snap ring. On DKV-14D compressor, use pulley puller pilot to protect compressor shaft. On all models, use a puller to remove pulley. Remove screw for clutch coil lead. Remove 3 clutch coil screws and clutch coil.
scientia non olet · About LEMON Manuals