LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> SEIKO-SEIKI Rotary Vane >> Shaft Seal >> Removal (Suzuki)

Removal (Suzuki)

Remove clutch plate, pulley and clutch coil. See CLUTCH COIL . Remove 8 compressor front head bolts. Push on compressor shaft while pulling on front head, using care not to remove cylinder from compressor housing. Remove compressor shaft seal from front head. See Figure.

scientia non olet · About LEMON Manuals