LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> SANDEN 7-Cylinder >> Clutch Coil & Bearing >> Removal (Jaguar)

Removal (Jaguar)

  1. Using 3 bolts, attach Puller (JD166-1) to clutch plate. While holding clutch plate with puller, remove shaft nut. Install puller bolt in center of puller, and tighten bolt to remove clutch plate.
  2. Remove adjustment shim(s) and Woodruff key. Remove pulley snap ring. Install threaded Adapter (JD166-5), onto compressor shaft. Engage Collets (JD166-5) to inner diameter of pulley and attach Puller (JD166-1) to collets.
  3. Install puller bolt in center of puller, and tighten bolt to remove pulley. Press bearing out of drive belt pulley. Remove screw for clutch coil lead. Remove snap ring and clutch coil.
scientia non olet · About LEMON Manuals