LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> NIPPONDENSO (DENSO) >> Clutch Coil >> Removal (Mercedes-Benz & Mitsubishi)

Removal (Mercedes-Benz & Mitsubishi)

  1. Hold clutch plate stationary. Remove clutch plate center bolt and clutch plate. If clutch plate cannot be removed by hand, tighten an 8-mm or 10-mm bolt into clutch plate center bolt hole to remove clutch plate.
  2. Remove shim(s) and pulley snap ring from compressor shaft. Tap pulley using a plastic hammer and remove pulley from compressor shaft. See Figure, Figure or Figure . Remove retaining screw for clutch coil lead. Remove clutch coil snap ring and clutch coil.
scientia non olet · About LEMON Manuals