Temperature Gauge
NOTE:
Testing procedure for Forester is not available from the manufacturer.
Ensure temperature gauge circuit is okay. Disconnect temperature gauge sending unit connector. Connect resistor of specified ohms value between ground and temperature gauge sending unit connector. See TEMPERATURE GAUGE TEST table. Turn ignition on. Replace gauge if value indicated on gauge is not as specified.
TEMPERATURE GAUGE TEST
| Application | Resistor Value Ohms | Gauge Reading °F (°C) | ||
|---|---|---|---|---|
| Forester | (1) | (1) | ||
| Impreza | 2500 | 68 (20) | ||
| 2000 | 104 (40) | |||
| 1250 | 176 (80) | |||
| Legacy | 187.6 | 122 (50) | ||
| 19.0 | 248 (120) | |||
|
||||