Removal & Installation
- Remove disc brake assembly from support and wire it aside. To remove disc rotor from hub, loosen parking brake shoe adjustment by inserting a screwdriver through backing plate access hole to turn adjusting star wheel. Remove disc rotor from hub. See Fig 1
.
- Remove shoe return springs. Remove front shoe hold-down spring and pin. Remove strut and strut spring. Remove adjuster star wheel assembly. Remove brake shoe. Remove rear shoe hold-down spring and pin. Remove parking brake cable from lever. Remove lever and washer from shoe. To install, reverse removal procedure. Adjust parking brake. See PARKING BRAKE
under ADJUSTMENTS.
Courtesy of SUBARU OF AMERICA, INC.