Cylinder Block
CYLINDER BLOCK
| Application | In. (mm) | ||
|---|---|---|---|
| Cylinder Bore | |||
| Standard Diameter | |||
| "A" | 3.9175-3.9179 (99.505-99.515) | ||
| "B" | 3.9171-3.9175 (99.495-99.505) | ||
| Maximum Boring Limit | .020 (.50) | ||
| Maximum Deck Warpage | .002 (.05) | ||
| Maximum Surface Grinding Limit | .004 (.10) | ||
| Maximum Taper | .002 (.05) | ||
| Out-Of-Round | |||
| Standard | .0004 (.010) | ||
| Service Limit | .0020 (.050) | ||