LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1997 >> Legacy Outback Limited, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> ENGINE MECHANICAL - 2.5L DOHC 4-Cylinder >> Removal & Installation >> Cylinder Head >> Installation

Cylinder Head: Installation

  1. Ensure mating surfaces are clean and dry. Install NEW head gasket. Coat head bolt threads with oil. Tighten bolts to specification in sequence. See Fig 1. See TORQUE SPECIFICATIONS .
  2. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Cylinder Head Bolt Tightening Sequence
G96J18886Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals