LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1997 >> Legacy Outback Limited, Automatic >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differential - Rear >> Removal & Installation >> Drive Shaft >> Removal

Drive Shaft: Removal

  1. Remove rear exhaust pipe (if necessary). Remove front cover of rear differential mount (if equipped). Mark drive shaft for installation reference.
  2. Remove bolts attaching drive shaft to pinion flange. Remove bolts attaching center bearing to body. Remove drive shaft from transaxle. Plug opening at rear of extension housing.
scientia non olet · About LEMON Manuals