DTC 31, 32 & 33: Vacuum Pump, Air Valve & Release Valve
- Check Vacuum Pump And Valve Assembly
Check vacuum pump and valve assembly. See VACUUM PUMP & VALVE ASSEMBLY
under COMPONENT TESTS. If assembly is okay, go to next step. If assembly is defective, replace vacuum pump and valve assembly.
- Check Harness
Disconnect cruise control module harness connector. Measure resistance in wires between vacuum pump and valve assembly and cruise control module harness connectors. See WIRING DIAGRAMS
. If resistance is 10 ohm or less in all wires, replace cruise control module. If resistance is greater than 10 ohms in any wire(s), repair open in appropriate wire(s).