LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1995 >> SVX L, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Unit >> Removal

Power Brake Unit: Removal

  1. From inside vehicle, remove brake pedal clevis pin snap pin and clevis pin. Remove power brake retaining nuts from firewall inside vehicle. Remove master cylinder. See MASTER CYLINDER R & I  .
  2. Disconnect vacuum hose at power brake unit. Remove power brake unit without damaging hydraulic lines.
scientia non olet · About LEMON Manuals