Removal & Installation (XT & XT6)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Subaru XT6, 1991 Subaru XT, 1991 Subaru Loyale, 1991 Subaru Legacy, and 1991 Subaru Justy. However, it is still accessible from the selected car via links, so may be relevant.
Remove screws from rear of steering wheel and loosen telescopic lever. Hold concave portion of pad by hand, and pull it toward you. Loosen nut on top of steering shaft and remove telescopic lever. Using a puller, remove steering wheel. To install, reverse removal procedure.