Removal & Installation (Loyale)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Subaru XT6, 1991 Subaru XT, 1991 Subaru Loyale, 1991 Subaru Legacy, and 1991 Subaru Justy. However, it is still accessible from the selected car via links, so may be relevant.
Remove horn pad lower screws, slide horn pad assembly forward and disconnect horn connector. Remove horn pad by pulling it. Remove steering wheel nut, and withdraw wheel from shaft using steering wheel puller. To install, reverse removal procedure.