LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Steering Columns) >> Removal & Installation >> Combination Switch >> Removal & Installation (XT & XT6)

Removal & Installation (XT & XT6)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Subaru XT6, 1991 Subaru XT, 1991 Subaru Loyale, 1991 Subaru Legacy, and 1991 Subaru Justy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove lower instrument panel cover. Remove column covers. Remove steering wheel cover. Remove steering wheel using a steering wheel puller.
  2. Disconnect wiring harness from steering column. Disconnect wiring connectors. Remove combination switch from control wing. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals