LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal

Front Brake Rotor: Removal

  1. Raise and support vehicle. Remove wheel. Remove caliper assembly, and wire it aside. DO NOT disconnect brakeline or parking brake cable from caliper. Remove caliper support bracket with attached disc pads from steering knuckle.
  2. On Justy, remove center piece wedge using a screwdriver. Lightly tap screwdriver into center piece slot to spread wedge, and remove wedge from axle.
  3. On Legacy and SVX, remove rotor from hub assembly. If rotor seizes to hub, use 8-mm bolts in screw holes on rotor to remove rotor.
  4. On Loyale, remove cotter pin and nut from axle shaft. Remove rotor and hub assembly from axle shaft using a puller. Separate rotor from hub.
scientia non olet · About LEMON Manuals