LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Installation

Front Brake Rotor: Installation

  1. To install, reverse removal procedure. Tighten hub-to-rotor bolts evenly and to specification. See TORQUE SPECIFICATIONS table at end of article.
  2. On Justy, tighten wheel bearing/axle nut to 130 ft. lbs. (177 N.m). On Loyale, tighten axle shaft nut to 145 ft. lbs. (196 N.m). On all models, depress brake pedal several times to seat pads.
scientia non olet · About LEMON Manuals