Seat Belt Warning Light Indications
If any self-diagnosis item is malfunctioning, the seat belt warning light activates immediately after the ignition switch is turned ON. Warning light signal is as follows.
When the warning light blinks at an interval of 0.3 seconds, conduct a self-diagnosis operation to determine the problem indicated by the trouble code.
NOTE:
If either the driver's seat belt or the passenger's seat belt is not fastened after the ignition switch is turned ON, the warning light will remain on after it blinks for 6 ± 2 seconds.
If any shoulder belt or lap belt (for the driver or front passenger) is unfastened after the ignition switch is turned ON, the buzzer will sound for 6 ± 2 seconds.