LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Restraints >> Passive Restraints >> Seat Belts - Automatic >> Troubleshooting Without Codes >> Seat Belt Warning Light Remains On After Ignition Switch Is Turned On.

Seat Belt Warning Light Remains On After Ignition Switch Is Turned On.

  1. Disconnect connector from control unit.
  2. Measure resistance between control unit connector R43 No.5 and body. Resistance should be 1 MOhm min.
scientia non olet · About LEMON Manuals