LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Restraints >> Passive Restraints >> Seat Belts - Automatic >> Removal & Installation >> Front Seat Belt (Manual Lap Belt) Outer Belt Assembly >> Removal

Front Seat Belt (Manual Lap Belt) Outer Belt Assembly: Removal

  1. Tilt backrest completely backward.
  2. Press tabs (2 places) to remove cap.
    Fig 1: Front Seat Belt Trim Removal
    G50E16091
  3. Slide front seat to front end along slide rails.
  4. Remove center pillar lower trim panel from body.
  5. Remove cap from LAP ELR cover.
    Fig 2: Lap Belt ELR Cover Identification
    G50F16092
  6. Remove screws which secure LAP ELR cover, and slide it forward and away from body.
  7. On 4-Door Sedan, remove rear cushion. On Station Wagon, fold rear cushion forward.
  8. Roll up rear edge of mat, and remove rear side sill inner trim.
  9. Remove anchor bolts (two places) and move ELR forward.
    Fig 3: Lap Belt ELR Anchor Bolt Location
    G50G16093
  10. Remove opener cable and harness clip from ELR, and pull ELR out of hole in body.